Product Description
High-temperature Burner-Superflame
HB Series Superflame Burner
Superflame burner is an industrial application burner designed by
Rapidflame for high temperature. It is widely used in the waste
incinerator (RTO/TO) , thermal treatment furnace, non-ferrous metal
smelting furnace, tunnel furnace, calcinator, hot air furnace,
drying furnace, cracking furnace, etc.
Product Features
It applies to the furnace for which the maximum temperature is
***0ºC;High heat transmission efficiency, even furnace
temperature;It applies to the working conditions under which high
temperature and low temperature can be changed flexibly;The fuel or
air volume can be adjusted flexibly so as to meet requirements
under all kinds of working conditions;Low CO and NOX discharge; The
regulating ratio of the burner can reach *0:1;Six models with
different powers can be selected.
Product Parameters
| Typical
Paramters |
| Burner
model |
Rated power
(kW) |
Differential
air pressure at nozzle at normal temperature, 7kPa |
Operation
conditions at normal temperature |
| Combustion air at normal
temperature |
Pre-heated combustion air
(**0ºC) |
Allowable percent of
excessive air (%) |
Flame length (m) |
Differential pressure at
burner nozzle (kPa) |
Combustion air flow
** (m3/h) |
| SFG*6 |
**0 |
**8 |
**0 |
1.4 |
0.5 |
**4 |
| 3.5 |
**4 |
| 7 |
**7 |
| *0.5 |
**0 |
| SFG*7 |
**0 |
**9 |
**0 |
1.5 |
0.5 |
**1 |
| 3.5 |
**2 |
| 7 |
**3 |
| *0.5 |
**7 |
| SFG*8A |
***0 |
**4 |
**0 |
2.4 |
0.5 |
**7 |
| 3.5 |
**0 |
| 7 |
***7 |
| *0.5 |
***3 |
| SFG*8B |
***0 |
***0 |
**0 |
2.7 |
0.5 |
**3 |
| 3.5 |
***9 |
| 7 |
***0 |
| *0.5 |
***0 |
| SFG*9 |
***0 |
***8 |
**0 |
4.9 |
0.5 |
***5 |
| 3.5 |
***2 |
| 7 |
***8 |
| *0.5 |
***2 |
| SFG**0 |
***0 |
***1 |
**0 |
5.8 |
0.5 |
***6 |
| 3.5 |
***2 |
| 7 |
***4 |
| *0.5 |
***6 |
| ** - The flow
of the combustion air in the table is the ideal value. *0%
additional fans should be configured when configuring the
combustion air fans. |
Important Notes for Type Selection
1.Control Mode of Burners
Comflame burners are designed with a wide range of combustible gas
regulation ratio. Stable combustion can be ensured in case of
excessive combustion air or excessive combustion gases. Several
control methods can be used to regulate the combustible gases, e.g.
diaphragm regulation, mechanical regulation and electronic
regulation.
2. Ignition and Flame Detection
Comflame burners are designed with three independent holes, which
are used to install the ignition nozzle, flame detector and
observation window. Optional flame detectors include the
ultraviolet flame detector or flame ion detection rod. The
installation positions of the ignition nozzle, flame detector and
observation window can be adjusted based on actual operation
conditions to ensure higher stability and accuracy of ignition and
flame detection. Manual ignition using a torch is allowed in
special cases. However, excessive flow of combustion air should be
avoided in this case. Otherwise, ignition may fail.
3. Type Selection at Pre-heated Air Environment
The Superflame burner can use the environment air and
high-temperature preheated air (in case the burner nozzle is made
of alloy) (up to **0ºC). In the case of pre-heated air environment,
see the rated power values under "pre-heated air combustion"
(**0ºC) in the typical parameter sheet to select proper types.
| Country: |
China |
| Model No: |
Superflame
|
| FOB Price: |
(Negotiable)
Get Latest Price
|
| Place of Origin: |
- |
| Price for Minimum Order: |
- |
| Minimum Order Quantity: |
- |
| Packaging Detail: |
- |
| Delivery Time: |
- |
| Supplying Ability: |
- |
| Payment Type: |
- |
| Product Group : |
burner
|
